The cost-efficient fixing for flexible use in non-cracked concrete

Bolt anchor FBN II

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

Product variants

Zulassungen / Prüfberichte

85 Produktvarianten

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,stand./hef,min.

Thread

Width across nut

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Mehr Ergebnisse

Gesehen 18 von 85 Variante(n)

Keine Produkte gefunden

Für Ihre Filter konnten leider keine Produkte gefunden werden

Advantages

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Functionality

The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0211

European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete

Created on 13/07/2020

ETA Certification Document

pdf, ETA-18/0101

European Technical Assessment for fischer Bolt Anchor FBN II HDG Torque controlled expansion anchor - Mechanical fasteners of sizes M8, M10, M12, M16 and M20 for use in uncracked concrete

Created on 16/07/2018

DOP - Declaration of Performance

pdf, DoP No. 0098

Declaration of Performance for fischer Bolt Anchor FBN II HDG (Metal anchors for use in concrete with variable working life (heavy-duty type))

Created on 23/07/2018

DOP - Declaration of Performance

pdf, DoP No. 0268

Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)

Created on 20/01/2021

DOP - Declaration of Performance

pdf, DoP No. 0192

Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)

Created on 27/07/2020

Load Table

pdf,

Bolt anchor FBN II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Technical Data Sheet

pdf,

FBN II Durability

Technical Data Sheet

pdf,

fischer bolt anchor FBN II HDG

Marketing Documents

pdf,

Bolt anchor FBN II. The cost-efficient fixing for flexible use in non-cracked concrete.

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Anchor length ( l )	50 mm
Max. usable length hef,stand./hef,min. ( t_fix )	5 / - mm
Thread ( ø x length )	M6 x 12 mm
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070231

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	50 mm
Anchor length ( l )	55 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Thread ( ø x length )	M6 x 17 mm
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070248

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / - mm
Thread ( ø x length )	M6 x 35 mm
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070255

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	61 mm
Anchor length ( l )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	5 / 15 mm
Thread ( ø x length )	M8 x 34 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209406625

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	66 mm
Anchor length ( l )	70 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Thread ( ø x length )	M8 x 39 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209406649

Bolt anchor FBN II

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download