The strong internally threaded anchor with unique 4-way expansion for fixings in aerated concrete

Aircrete anchor FPX-I

The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete.

Produktvarianter

Godkännanden/testrapporter

7 produktvariant(er)

Drill diameter

Min. bolt penetration

Max. bolt penetration

Effect. anchorage depth

Min. drill hole depth

Contents

Förklaring = Tillgängligt tillstånd— = Behörighet inte tillgänglig

Visade 7 av 7 variant(er)

Advantages

The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort.
The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation.
The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points.
The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process.
The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too.

Applications

Suspended ceilings
Cable trays
Pipelines
Ventilation ducts
Guard rails/hand rails
TV consoles
Kitchen cupboards
Stand-off installations

Building materials

Approved for:

Aerated concrete with compressive strength 2 to 7 N/mm²
Aerated concrete wall or ceiling boards with compressive strength 3.3 to 4.4 N/mm²
Planked aerated concrete masonry, e.g. plastered, tiled, papered etc.

Detaljerad information om byggmaterial finns i registreringsdokumentet.

Godkännanden

ETA-12/0456
DoP No. 0270

Functionality

The FPX-I with internal thread is suitable for pre-positioned installation.
Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole.
When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole.
When reached the optimum expansion, the hexagon wrench is released automatically from the anchor.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-12/0456

European Technical Assessment for fischer aircrete anchor FPX-I - Metal expansion fastener for use in autoclaved aerated concrete

Skapad den 19/07/2019

DOP - Declaration of Performance

pdf, DoP No. 0270

Declaration of Performance for fischer Aircrete Anchor FPX-I (Metal expansion fastener for use in autoclaved aerated concrete)

Skapad den 15/01/2021

Load Table

pdf,

Aircrete anchor FPX-I - Permissible loads and required component dimensions in cracked and non-cracked aerated concrete wall and slab plates.

Load Table

pdf,

Aircrete anchor FPX-I - Permissible loads and required component dimensions in aerated concrete masonry.

Systemkomponenter

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	10 mm
Max. bolt penetration ( l_E,max )	15 mm
Effect. anchorage depth ( h_ef )	70 mm
Min. drill hole depth ( h₁ )	95 mm
Contents	—
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4048962158359

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	10 mm
Max. bolt penetration ( l_E,max )	15 mm
Effect. anchorage depth ( h_ef )	70 mm
Min. drill hole depth ( h₁ )	95 mm
Contents	2 x FPX M6 I, 1 x setting tool
Packaging	Blister card
Amount	2 pcs.
GTIN (EAN-Code)	4048962218732

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	15 mm
Effect. anchorage depth ( h_ef )	70 mm
Min. drill hole depth ( h₁ )	95 mm
Contents	2 x FPX M8 I, 1 x setting tool
Packaging	Blister card
Amount	2 pcs.
GTIN (EAN-Code)	4048962181869

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	15 mm
Effect. anchorage depth ( h_ef )	70 mm
Min. drill hole depth ( h₁ )	95 mm
Contents	—
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4048962158366

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	10 mm
Max. bolt penetration ( l_E,max )	15 mm
Effect. anchorage depth ( h_ef )	70 mm
Min. drill hole depth ( h₁ )	95 mm
Contents	2 x FPX M10 I, 1 x setting tool
Packaging	Blister card
Amount	2 pcs.
GTIN (EAN-Code)	4048962181876

Aircrete anchor FPX-I

Produktvarianter

Fördelarna/produktbeskrivning

Ansökan och godkännande

Monteringsinstruktion

Dokument att ladda ned