Art. nr. 507431

fischer TermoZ CN 8/370

Productomschrijving

The high-performance ETICS hammerset fixing with compound nail.
Advantages
  • To set with few hammer blows.
  • The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
  • High retention forces thanks to the steel tip of the compound nail.
  • Small anchoring depth of 35 mm saves on drilling times.
  • The TermoZ CN is virtually free of thermal bridging due to the compound nail.
  • The compression zone in the shank allows the disc to be drawn in precisely.
  • Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
  • For insulating material thicknesses up to 340 mm.
The fischer termoz CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The fischer termoz CN comprises a grey plug sleeve with attached disc and a compound nail. The termoz CN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The steel point of the compound nail guarantees high holding forces. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Toepassing en goedkeuring

Applications
  • Attachment of ETICS insulating boards on concrete and masonry
  • Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Full blocks made from concrete
  • Building brick
  • Solid sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Lightweight aggregate concrete
  • Aerated concrete
De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.
Certificering
  • ETA-09/0394
  • DoP No. 0326

Montage instructies

Functionality
  • The fixing is set in push- through installation.
  • Simple, fast setting by driving the compound nail in using a standard hammer.
  • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
Mounting Strip 1 Picture
1 / 4

Technische gegevens

ETA-approval
Drill diameter (
d0
)
8 mm
Anchor length (
l
)
370 mm
Effect. anchorage depth (
hef
)
35 mm
Packaging Folding box
Amount 100 pcs.
GTIN (EAN-Code) 4048962081114

Documenten om te downloaden

European Technical Assessment for fischer TermoZ CN 8 / fischer TermoZ CN 8 R / fischer TermoZ CNplus 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
Gecreëerd op 18/10/2022
Declaration of Performance for fischer termoz CN 8 / fischer termoz CN 8 R / termoz CNplus 8 R (Plastic anchors for use in concrete and masonry)
Gecreëerd op 31/10/2022
Termoz CN 8 - Permissible loads for a single anchor for fixing of external thermal insulation composite systems
cd-green-64c8fdbcdb-24hwn