The ready-to-use, extrudable joint mortar for the long-lasting closing of masonry joints

Repair AC (DEC)

The fischer repairing mortar DEC is ideal for the lasting renovation of joints, the closing of cracks in masonry and the optical repairing of chips and breaks in façades and masonry. It can close drill holes that have burst, as well as downpipes, railings, lamps and cable connections. The practically odourless mortar can be easily processed thanks to its stable consistency. It offers really good resistance to weather, ageing and UV. Once a skin has formed, the fischer DEC is rainproof. fischer DEC is not suitable for permanent exposure to water.

Product variants

4 Product variant (s)

Contents

Language on label

Contents

Packaging

Amount

GTIN (EAN-Code)

Viewed 4 of 4 variant (s)

Advantages

The ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.
Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.
The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.

Applications

Repairing masonry joints
Closing masonry cracks
Repairing chipped edges
Closing drill holes in facing masonry during repair work
General repair work (e.g. drill holes with cracked edges)
For a better reusability, to close opened cartridges with adhesive tape

Building materials

Concrete
Pumice
Fibre cement
Gypsum
Wooden materials
Sand-lime brick
Ceramics
Clinker brick
Masonry
Aerated concrete
Plaster
Cement
Brick

You can find detailed information on building materials in the registration document.

Functionality

Chemical base: 1C polymer dispersion
Plastic
Consistency: Firm
Practically odour-free
Skin formation time: Approx. 10 minutes.
Processing temperature: +5 °C to +40 °C (not below +5 °C)
Temperature resistance up to -30 °C (fully cured)
Weather-proof after approx. 24 hours.
Very good resistance to UV, weather and ageing
Paintable
Frost-protected in the cartridge
Free of silicone, MDI and solvents
Not recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)