The high-quality one-component installation foam with reusable fischer FixAdapter
1c premium rapid installation foam
The fischer rapid installation foam Premium PU 500/750 is ideal for the filling, insulation and isolation of window connection joints and the filling of the connection joints of door frames, finished elements, wall connections, wall penetrations and cavities. It has extremely high joint sound insulation. The test report for water pressure resistance confirms its suitability as a fountain foam. The beige fischer adapter foam PU 500/750 dispenser is fitted with the fischer fix adapter, which enables the further use of opened cans. The solid valve offers top security against blockages and the loss of gas. Protective gloves for end users are included.
The reclosable fix adapter allows for immediate use and for the reuse of opened cans, thus guaranteeing long-lasting functionality.
The used solid valve prevents adhesion when being stored horizontally and premature gas loss.
The rapid installation foam has been approved as watertight by an external inspection and is thus suitable for use in wet conditions. It fulfils the requirements of a well foam.
The ergonomic handle sits perfectly in the hand and allows for easy use.
Certificates
General test certificate from building authorities P-NDS04-136 for B2
Proven joint soundproofing: R(ST,w)=61 (-1; -3) dB in line with ISO EN 717-1
Test for watertightness for the adhesion of manhole rings
EMICODE® EC 1 Plus - very low emmission
French VOC-emission class A+
Applicazioni e Certificazioni
Applications
Bonding and sealing manhole rings
Insulating and filling in roofing work and dry construction
Insulating and filling window connection joints, around window sills and shutter boxes
Insulating and filling finished elements, wall connections and wall penetrations
Building materials
Bonds to all standard building materials such as:
Concrete
Anodised layer
Gypsum plasterboard
Wood
Sand-lime brick
Plastics (not on PE, PP, Teflon, silicone)
Masonry
Metals with priming coat
Plaster
Maggiori informazioni su materiali di supporto, ecc. sono disponibili nella documentazione tecnica.
Istruzioni di montaggio
Functionality
1-component PU foam
Building material class B2
Processing temperature environment: +5 °C to +35 °C (can temperature: +5 °C to +25 °C)
Non-tacky within approx. 20 minutes
Can be cut within approx. 40 minutes
Cures within 5 to 8 hours
Temperature resistant from -40 °C to +90 °C
Layer thicknesses > 50 mm: foam in several layers and then dampen.
Fresh foam stains can be removed immediately with fischer PU cleaner.
